Amsterdam 5

 Article number: 725.000.000


Multi-purpose printability tester with 5 print shafts.

New range of Printability testers with integrated, camera based, analysis systems. The range consits of devices with one to 6 printing shaft for maximum flexibility of test methods. The long range of test methods can be extended with user defined methods. With that it is capable to perform all tests of a Global Standard Tester P plus the tests of a Global Standard Tester 2 and more.

Additionally it is prepared to do on-line analysis of mottling with a camera based analysis system.
•1 to 6 printing shafts, each can be equipped with a drive for printing in register if needed
•Very small interval times, down to 0,2 s
•Large number of test methods
•Very easy in operation
•In-line analysis of several test methods
•Export of scanned images

Five printing stations, constant speed, accellerating speed, camera for image recording, optional analysis of heliotest, mottle, print penetration, IGT roughness, doctoring station for gravure printing, user programmable, recording of test data and settings, export of data on USB stick.

Dimensions(L x W x H):60cm x 63cm x 73cm
Main application:
Conformance with standards/W-leaflet:ISO 3783-2006, ISO 2834, ISO 2836, ISO 2846, NEN 1836, NEN 1839,
Water bath and temperature:
Speed range and modes:Constant: 0.1 – 4.0 m/s in steps of 0.1 m/s Accelerating endspeed: 0.1 – 4.0 m/s in steps of 0.1 m/s
Forces:100 – 1000 N in steps of 1 N
Substrate requirements:Flexible substrates
Interval time and number:1 – 600 s in steps of 1 s
Printing shafts type and options:5 print shafts
Shaft positioning:Automatically, programmable
Lifting system:Automatically
Print length and width:5-50 mm wide, 10-500 mm length (sector dependent) depends on printing form and test method
Printing discs:Alumimium
rubber blanket
discs for specific test
Sector positioning:Automatically, programmable
Sector type and options:180° sector with clamps, 360° sector without clamps with dfferent coverages
Doctoring system:Standard at print shaft 1
Dispensing system:If necessary this will be delivered in accessories set
Pre-programmed tests:Pick
Print penetration
IGT Roughness
Density Colour and transparency
custom made tests on request
Interfaces:USB portal
Software updates:Via USB
Data export options:Recording and export of images, settings and analysis results via USB
Additional items:466.000.000 High Speed Inking Unit 4
408.000.200 IGT ink Pipette 0.01 ml resolution
408.000.400 IGT ink Pipette 0.001 ml resolution
441.000 Pick Start Viewer PSV
441.000.040 Delamination/Blistering viewer
Accessories:Heliotest set
hygroexpansivity set
gravure set
pick set
loose nd weakly bound particles set
different printing discs for several applications
westvaco inking set
intaglio inking set
Inks or liquids:Pick test oils, pick inks, penetration liquid, roughness liquid, setting ink, mottling ink, density ink,
Inking speeds:
Inking programs:
Top rollers:
Maintenance:Yearly. The annual maintenance and calibration of the tester can be carried out by IGT Testing Systems or companies authorized by IGT Testing Systems. Information can be obtained from your supplier or the local agent.
Compatible instruments:Amsterdam 6
Measurement range:
Light source/ power/angle:
Shelf life:
Use life:
Description of property:
Power Supply Requirements:115 V 50/60 Hz or 230 V 50/60 Hz
Guarantee:Standard one year
Space requirements:0.7 m2
Standard delivery time:10-12 weeks


If you have any Query or Order?